1. On a clean, dry truck the bed is masked as if it is to be painted.

2. The entire truck is covered to protect from overspray.

3. The bed is sanded and wiped with a grease and wax remover...it's spray time!

4. Dry in 3-5 seconds, 1/8" to 1/4" thick only takes 3 to 4 passes.
(Spray suit is for overspray only)

5. Immediately after spraying, the truck is unmasked.

From start to finish it took 1-2 hours for one person to complete the job. Truck is ready for use immediately - even in the rain or cold, without affecting the material.